tzm-m-series www.vishay.com vishay semiconductors rev. 1.1, 28-sep-11 1 document number: 83393 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 small signal zener diodes features ? very sharp reverse characteristic ? low reverse current level ? very high stability ?low noise ?tzmc - v z -tolerance 5 % ?tzmb - v z -tolerance 2 % ? aec-q101 qualified ? compliant to rohs directive 2002/95/ec and in accordance to weee 2002/96/ec ? halogen-free according to iec 61249-2-21 definition application ? voltage stabilization primary characteristics parameter value unit v z range nom. 2.4 to 75 v test current i zt 2.5; 5 ma v z specification pulse current int. construction single ordering information device name ordering code taped units per reel minimum order quantity tzm-m-series tzm-m-seri es-18 10 000 (8 mm tape on 13" reel) 10 000/box tzm-m-series tzm-m-seri es-08 2500 (8 mm tape on 7" reel) 12 500/box package package name weight molding compound flammability rating moisture sensitivity level soldering conditions minimelf sod-80 31 mg ul 94 v-0 msl level 1 (according j-std-020) 260 c/10 s at terminals absolute maximum ratings (t amb = 25 c, unless otherwise specified) parameter test condition symbol value unit power dissipation r thja ? 300k/w p tot 500 mw zener current i z p tot /v z ma junction to ambient air on pc board 50 mm x 50 mm x 1.6 mm r thja 500 k/w junction temperature t j 175 c storage temperature range t stg - 65 to + 175 c forward voltage (max.) i f = 200 ma v f 1.5 v
tzm-m-series www.vishay.com vishay semiconductors rev. 1.1, 28-sep-11 2 document number: 83393 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 notes ? additional measurement of voltage group tzmc9v1-m to tzmc75-m, i r at 95 % v zmin. ? 35 na at t j = 25 c (1) at t j = 150 c electrical characteristics (t amb = 25 c, unless otherwise specified) part number zener voltage range test current reverse leakage current dynamic resistance temperature coefficient of zener voltage v z at i zt1 i zt1 i zt2 i r at v r i r (1) at v r z z at i zt1 z zk at i zt2 tk vz v ma a v a v ? %/k min. nom. max. typ. typ. min. max. tzmc2v4-m 2.28 2.4 2.56 5 1 < 50 1 < 100 1 < 85 < 600 - 0.09 - 0.06 tzmc2v7-m 2.5 2.7 2.9 5 1 < 10 1 < 50 1 < 85 < 600 - 0.09 - 0.06 tzmc3v0-m 2.8 3.0 3.2 5 1 < 4 1 < 40 1 < 90 < 600 - 0.08 - 0.05 tzmc3v3-m 3.1 3.3 3.5 5 1 < 2 1 < 40 1 < 90 < 600 - 0.08 - 0.05 tzmc3v6-m 3.4 3.6 3.8 5 1 < 2 1 < 40 1 < 90 < 600 - 0.08 - 0.05 tzmc3v9-m 3.7 3.9 4.1 5 1 < 2 1 < 40 1 < 90 < 600 - 0.08 - 0.05 tzmc4v3-m 4 4.3 4.6 5 1 < 1 1 < 20 1 < 90 < 600 - 0.06 - 0.03 tzmc4v7-m 4.4 4.7 5 5 1 < 0.5 1 < 10 1 < 80 < 600 - 0.05 0.02 tzmc5v1-m 4.8 5.1 5.4 5 1 < 0.1 1 < 2 1 < 60 < 550 - 0.02 0.02 tzmc5v6-m 5.2 5.6 6 5 1 < 0.1 1 < 2 1 < 40 < 450 - 0.05 0.05 tzmc6v2-m 5.8 6.2 6.6 5 1 < 0.1 2 < 2 2 < 10 < 200 0.03 0.06 tzmc6v8-m 6.4 6.8 7.2 5 1 < 0.1 3 < 2 3 < 8 < 150 0.03 0.07 tzmc7v5-m 7 7.5 7.9 5 1 < 0.1 5 < 2 5 < 7 < 50 0.03 0.07 tzmc8v2-m 7.7 8.2 8.7 5 1 < 0.1 6.2 < 2 6.2 < 7 < 50 0.03 0.08 tzmc9v1-m 8.5 9.1 9.6 5 1 < 0.1 6.8 < 2 6.8 < 10 < 50 0.03 0.09 tzmc10-m 9.4 10 10.6 5 1 < 0.1 7.5 < 2 7.5 < 15 < 70 0.03 0.1 tzmc11-m 10.4 11 11.6 5 1 < 0.1 8.2 < 2 8.2 < 20 < 70 0.03 0.11 tzmc12-m 11.4 12 12.7 5 1 < 0.1 9.1 < 2 9.1 < 20 < 90 0.03 0.11 tzmc13-m 12.4 13 14.1 5 1 < 0.1 10 < 2 10 < 26 < 110 0.03 0.11 tzmc15-m 13.8 15 15.6 5 1 < 0.1 11 < 2 11 < 30 < 110 0.03 0.11 tzmc16-m 15.3 16 17.1 5 1 < 0.1 12 < 2 12 < 40 < 170 0.03 0.11 tzmc18-m 16.8 18 19.1 5 1 < 0.1 13 < 2 13 < 50 < 170 0.03 0.11 tzmc20-m 18.8 20 21.2 5 1 < 0.1 15 < 2 15 < 55 < 220 0.03 0.11 tzmc22-m 20.8 22 23.3 5 1 < 0.1 16 < 2 16 < 55 < 220 0.04 0.12 tzmc24-m 22.8 24 25.6 5 1 < 0.1 18 < 2 18 < 80 < 220 0.04 0,12 tzmc27-m 25.1 27 28.9 5 1 < 0.1 20 < 2 20 < 80 < 220 0.04 0.12 tzmc30-m 28 30 32 5 1 < 0.1 22 < 2 22 < 80 < 220 0.04 0.12 tzmc33-m 31 33 35 5 1 < 0.1 24 < 2 24 < 80 < 220 0.04 0.12 tzmc36-m 34 36 38 5 1 < 0.1 27 < 2 27 < 80 < 220 0.04 0.12 TZMC39-M 37 39 41 2.5 0.5 < 0.1 30 < 5 30 < 90 < 500 0.04 0.12 tzmc43-m 40 43 46 2.5 0.5 < 0.1 33 < 5 33 < 90 < 600 0.04 0.12 tzmc47-m 44 47 50 2.5 0.5 < 0.1 36 < 5 36 < 110 < 700 0.04 0.12 tzmc51-m 48 51 54 2.5 0.5 < 0.1 39 < 10 39 < 125 < 700 0.04 0.12 tzmc56-m 52 56 60 2.5 0.5 < 0.1 43 < 10 43 < 135 < 1000 0.04 0.12 tzmc62-m 58 62 66 2.5 0.5 < 0.1 47 < 10 47 < 150 < 1000 0.04 0.12 tzmc68-m 64 68 72 2.5 0.5 < 0.1 51 < 10 51 < 200 < 1000 0.04 0.12 tzmc75-m 70 75 79 2.5 0.5 < 0.1 56 < 10 56 < 250 < 1500 0.04 0.12
tzm-m-series www.vishay.com vishay semiconductors rev. 1.1, 28-sep-11 3 document number: 83393 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 notes ? additional measurement of voltage group tzmb9v1-m to tzmb75-m, i r at 95 % v zmin. ? 35 na at t j = 25 c (1) at t j = 150 c electrical characteristics (t amb = 25 c, unless otherwise specified) part number zener voltage range test current reverse leakage current dynamic resistance temperature coefficient of zener voltage v z at i zt1 i zt1 i zt2 i r at v r i r (1) at v r z z at i zt1 z zk at i zt2 tk vz v ma a v a v ? %/k min. nom. max. typ. typ. min. max. tzmb2v4-m 2.35 2.4 2.45 5 1 < 50 1 < 100 1 < 85 < 600 - 0.09 - 0.06 tzmb2v7-m 2.64 2.7 2.76 5 1 < 10 1 < 50 1 < 85 < 600 - 0.09 - 0.06 tzmb3v0-m 2.94 3.0 3.06 5 1 < 4 1 < 40 1 < 90 < 600 - 0.08 - 0.05 tzmb3v3-m 3.24 3.3 3.36 5 1 < 2 1 < 40 1 < 90 < 600 - 0.08 - 0.05 tzmb3v6-m 3.52 3.6 3.68 5 1 < 2 1 < 40 1 < 90 < 600 - 0.08 - 0.05 tzmb3v9-m 3.82 3.9 3.98 5 1 < 2 1 < 40 1 < 90 < 600 - 0.08 - 0.05 tzmb4v3-m 4.22 4.3 4.38 5 1 < 1 1 < 20 1 < 90 < 600 - 0.06 - 0.03 tzmb4v7-m 4.6 4.7 4.8 5 1 < 0.5 1 < 10 1 < 80 < 600 - 0.05 0.02 tzmb5v1-m 5 5.1 5.2 5 1 < 0.1 1 < 2 1 < 60 < 550 - 0.02 0.02 tzmb5v6-m 5.48 5.6 5.72 5 1 < 0.1 1 < 2 1 < 40 < 450 - 0.05 0.05 tzmb6v2-m 6.08 6.2 6.32 5 1 < 0.1 2 < 2 2 < 10 < 200 0.03 0.06 tzmb6v8-m 6.66 6.8 6.94 5 1 < 0.1 3 < 2 3 < 8 < 150 0.03 0.07 tzmb7v5-m 7.35 7.5 7.65 5 1 < 0.1 5 < 2 5 < 7 < 50 0.03 0.07 tzmb8v2-m 8.04 8.2 8.36 5 1 < 0.1 6.2 < 2 6.2 < 7 < 50 0.03 0.08 tzmb9v1-m 8.92 9.1 9.28 5 1 < 0.1 6.8 < 2 6.8 < 10 < 50 0.03 0.09 tzmb10-m 9.8 10 10.2 5 1 < 0.1 7.5 < 2 7.5 < 15 < 70 0.03 0.1 tzmb11-m 10.78 11 11.22 5 1 < 0.1 8.2 < 2 8.2 < 20 < 70 0.03 0.11 tzmb12-m 11.76 12 12.24 5 1 < 0.1 9.1 < 2 9.1 < 20 < 90 0.03 0.11 tzmb13-m 12.74 13 13.26 5 1 < 0.1 10 < 2 10 < 26 < 110 0.03 0.11 tzmb15-m 14.7 15 15.3 5 1 < 0.1 11 < 2 11 < 30 < 110 0.03 0.11 tzmb16-m 15.7 16 16.3 5 1 < 0.1 12 < 2 12 < 40 < 170 0.03 0.11 tzmb18-m 17.64 18 18.36 5 1 < 0.1 13 < 2 13 < 50 < 170 0.03 0.11 tzmb20-m 19.6 20 20.4 5 1 < 0.1 15 < 2 15 < 55 < 220 0.03 0.11 tzmb22-m 21.55 22 22.45 5 1 < 0.1 16 < 2 16 < 55 < 220 0.04 0.12 tzmb24-m 23.5 24 24.5 5 1 < 0.1 18 < 2 18 < 80 < 220 0.04 0,12 tzmb27-m 26.4 27 27.6 5 1 < 0.1 20 < 2 20 < 80 < 220 0.04 0.12 tzmb30-m 29.4 30 30.6 5 1 < 0.1 22 < 2 22 < 80 < 220 0.04 0.12 tzmb33-m 32.4 33 33.6 5 1 < 0.1 24 < 2 24 < 80 < 220 0.04 0.12 tzmb36-m 35.3 36 36.7 5 1 < 0.1 27 < 2 27 < 80 < 220 0.04 0.12 tzmb39-m 38.2 39 39.8 2.5 1 < 0.1 30 < 5 30 < 90 < 500 0.04 0.12 tzmb43-m 42.1 43 43.9 2.5 0.5 < 0.1 33 < 5 33 < 90 < 600 0.04 0.12 tzmb47-m 46.1 47 47.9 2.5 0.5 < 0.1 36 < 5 36 < 110 < 700 0.04 0.12 tzmb51-m 50 51 52 2.5 0.5 < 0.1 39 < 10 39 < 125 < 700 0.04 0.12 tzmb56-m 54.9 56 57.1 2.5 0.5 < 0.1 43 < 10 43 < 135 < 1000 0.04 0.12 tzmb62-m 60.8 62 63.2 2.5 0.5 < 0.1 47 < 10 47 < 150 < 1000 0.04 0.12 tzmb68-m 66.6 68 69.4 2.5 0.5 < 0.1 51 < 10 51 < 200 < 1000 0.04 0.12 tzmb75-m 73.5 75 76.5 2.5 0.5 < 0.1 56 < 10 56 < 250 < 1500 0.04 0.12
tzm-m-series www.vishay.com vishay semiconductors rev. 1.1, 28-sep-11 4 document number: 83393 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 basic characteristics (t amb = 25 c, unless otherwise specified) fig. 1 - total power dissipation vs. ambient temperature fig. 2 - typical change of working voltage under operating conditions at t amb = 25 c fig. 3 - typical change of working voltage vs. junction temperature fig. 4 - temperature coefficient of v z vs. z-voltage fig. 5 - diode capacitance vs. z-voltage fig. 6 - forward current vs. forward voltage 0 120 160 0 100 300 400 500 600 p tot - total po w er dissipation (m w ) t am b - am b ient temperat u re (c) 200 95 9602 200 80 40 10 15 20 1 10 100 1000 v z - v oltage change (m v ) v z - z- v oltage ( v ) 25 95 9598 t j = 25 c i z = 5 ma 0 5 - 60 60 120 180 0.8 0.9 1.0 1.1 1.2 1.3 v ztn - relative voltage change t j - junction temperature (c) 240 95 9599 0 v ztn = v zt /v z (25 c) 0 tk vz = 10 x 10 -4 /k 8 x 10 -4 /k 2 x 10 -4 /k 6 x 10 -4 /k 4 x 10 -4 /k - 4 x 10 -4 /k - 2 x 10 -4 /k - 5 0 5 10 15 v z - z- v oltage ( v ) 95 9600 i z = 5 ma 0 10 203040 50 tk v z - temperat u re coefficient of v z (10 -4 /k) 10 15 0 50 100 150 200 c d - diode capacitance (pf) v z - z- v oltage ( v ) 25 95 9601 20 t j = 25 c v r = 2 v 0 5 0 0.2 0.4 0.6 0.8 0.001 0.01 0.1 1 10 100 1.0 95 9605 i f - for w ard c u rrent (ma) v f - for w ard v oltage ( v ) t j = 25 c
tzm-m-series www.vishay.com vishay semiconductors rev. 1.1, 28-sep-11 5 document number: 83393 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 7 - z-current vs. z-voltage fig. 8 - z-current vs. z-voltage fig. 9 - differential z-resistance vs. z-voltage fig. 10 - thermal response 8 20 95 9604 0 20 40 60 80 100 i z - z-c u rrent (ma) p tot = 500 m w t am b = 25 c 046 12 v z - z- v oltage ( v ) 15 20 25 30 0 10 20 30 40 50 i z - z-c u rrent (ma) v z - z- v oltage ( v ) 35 95 9607 p tot = 500 m w t am b = 25 c 0 101520 1 10 100 1000 25 95 9606 t j = 25 c i z = 1 ma 5 ma 10 ma v z - z- v oltage ( v ) r z - differential z-resistance ( ) 5 1 10 100 1000 z thp - thermal resistance for p u lse cond. (k w ) t p - p u lse length (ms) 95 9603 10 -1 10 0 10 1 10 2 t p /t = 0.5 t p /t = 0.2 t p /t = 0.1 t p /t = 0.05 t p /t = 0.02 t p /t = 0.01 single p u lse r thja = 300 k/ w t = t jmax - t am b i zm = (- v z + ( v z 2 + 4r zj x t/z thp ) 1/2 )/(2r zj )
tzm-m-series www.vishay.com vishay semiconductors rev. 1.1, 28-sep-11 6 document number: 83393 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 package dimensions in millimeters (inches): minimelf sod-80 cathode indification 0.47 (0.019) max. 2.5 (0.098) max. 1.25 (0.49) min. 3.7 (0.146) 3.3 (0.130) 5 (0.197) ref. 2 (0.079) min. 1.6 (0.063) 1.4 (0.055) foot print recommendation: * * the gap b et w een pl u g and glass can b e either on cathode or anode side doc u ment no.:6.560-5005.01-4 re v . 8 - date: 07.j u ne.2006 96 12070
legal disclaimer notice www.vishay.com vishay revision: 12-mar-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products no t expressly indicated for use in such applications do so at their own risk and agr ee to fully indemnify and hold vishay and it s distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale , including attorneys fees, even if such claim alleges that vis hay or its distributor was negligent regarding th e design or manufacture of the part. please contact authorized vishay personnel t o obtain written terms and conditions regardin g products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu.
|
